Contract Coating by CMC Klebetechnik Germany
03.09.2013
IT, NewMedia & Software
(NL/2348443567) In the film and adhesive tape industry very large quantities are frequently produced. One reason for this is the often very high investment costs for the production facilities.
In this case, only mass production can cover the initial costs and the running costs.
However, companies specialised in the cost-effective production of large quantities mostly set store by only one or two products. And these then have to run day and night, if possible seven days a week.
With CMC coating technology this is different. The coating facilities are far slower than high-output coaters, which apply up to 1000m per minute. Yet, if we examine the requirement for Teflon® film, for example, it becomes clear that such a high-output coater is unsuited for this material:
High-output coaters coat very fast on systems which are as long as possible. This can mean that while driving in the facility a large quantity of material is already applied with incorrect settings. Furthermore, thousands of square metres are very quickly coated.
But the requirement for such expensive films as Teflon® is not of the order of magnitude of "thousands of square metres". So, after a short time another product must be produced. Specialised facilities are not designed for this. The setup times can be very long and therefore drive up costs.
CMC coating technology coats exactly in the areas which large coaters cannot cover. Production batches of around 500m² to several thousand square metres are usual. In the cross-fire between coating speed and setup effort, this achieves optimal balance and therefore optimal pricing.
CMC coating technology has two systems for solvent-based coating compounds, one of these up to 1,900mm wide. Between approximately 10µm and 1000µm compound can be applied, while normally up to around 150µm dry is sufficient.
Thus, it is no surprise that since 2009 more and more companies are seeking outsourced coating. Competitors are also shifting small production volumes of a few thousand square metres from their large facility to the more flexible and more cost-effective coating facilities of CMC coating technology.
By contrast with coaters specialised in only a few products, CMC coating technology has very extensive experience with different materials and applications. The many interested companies benefit from this knowledge.
Whether for special constructions in battery or fuel cell technology, medicine, constructions in the aviation industry or in safety engineering: All applications have their specific requirements which must be translated to the right blank films and coatings.
Class and not mass is therefore not meant in the sense that mass is bad. Far more, it describes the field of activity of CMC coating technology. Solving problems with small and middle-sized requirements and special requirements for the performance and individuality of the product.
CMC Klebetechnik
Rudolf-Diesel-Straße 4 67227 Frankenthal
Pressekontakt
http://www.cmc.de
CMC Klebetechnik
Rudolf-Diesel-Straße 4 67227 Frankenthal
Diese Pressemitteilung wurde über PR-Gateway veröffentlicht.
Für den Inhalt der Pressemeldung/News ist allein der Verfasser verantwortlich. Newsfenster.de distanziert sich ausdrücklich von den Inhalten Dritter und macht sich diese nicht zu eigen.
Weitere Artikel von Gerald Friederici
03.09.2013 | Gerald Friederici
Lohnbeschichtungen von Folien
Lohnbeschichtungen von Folien
03.09.2013 | Gerald Friederici
ETFE-Folie für den Einsatz als Gebäudehüllen
ETFE-Folie für den Einsatz als Gebäudehüllen
03.09.2013 | Gerald Friederici
The fifth building material - ETFE
The fifth building material - ETFE
03.09.2013 | Gerald Friederici
Kostenvorteile nutzen durch externe Dienstleister am Beispiel von Folienbeschichtungen
Kostenvorteile nutzen durch externe Dienstleister am Beispiel von Folienbeschichtungen
03.09.2013 | Gerald Friederici
Spleissen von Etikettenbahnen, Transferkleber für Papieren und Folien, kundenspezifische Beschichtungen - CMC zeigt, was es für die Etikettenindustrie
Spleissen von Etikettenbahnen, Transferkleber für Papieren und Folien, kundenspezifische Beschichtungen - CMC zeigt, was es für die Etikettenindustrie
Weitere Artikel in dieser Kategorie
19.04.2024 | Onapsis
Neuer Threat Report von Onapsis und Flashpoint: Anstieg der Ransomware-Vorfälle durch ERP-Kompromittierung um 400 %
Neuer Threat Report von Onapsis und Flashpoint: Anstieg der Ransomware-Vorfälle durch ERP-Kompromittierung um 400 %
19.04.2024 | SEO Werkstatt
Von der Vision zur Realität: Webdesign Konzeption und Umsetzung von Ideen!
Von der Vision zur Realität: Webdesign Konzeption und Umsetzung von Ideen!
19.04.2024 | FACTUREE – Der Online-Fertiger I cwmk GmbH
FACTUREE empfiehlt Bauteilfertigung und Oberflächenveredelung aus einer Hand
FACTUREE empfiehlt Bauteilfertigung und Oberflächenveredelung aus einer Hand
19.04.2024 | AC Süppmayer GmbH
AC Süppmayer GmbH und ThinkOwl Group geben strategische Partnerschaft zur gemeinsamen Entwicklung von KI-Lösungen bekannt
AC Süppmayer GmbH und ThinkOwl Group geben strategische Partnerschaft zur gemeinsamen Entwicklung von KI-Lösungen bekannt
18.04.2024 | eperi GmbH
Im öffentlichen Sektor mit Microsoft 365 E-Mail- und Kalenderdaten sicher arbeiten
Im öffentlichen Sektor mit Microsoft 365 E-Mail- und Kalenderdaten sicher arbeiten